Data whose decimal point's presence and/or position depends on input range. Example:When Read messured value(PV) is -20.0°c,-20.0 is processed as -200; When Read PID output value is 20,20 is process... ...
2018/7/3Data whose decimal point's presence and/or position depends on input range. Example:When Read messured value(PV) is -20.0°c,-20.0 is processed as -200; When Read PID output value is 20,20 is process... ...
2016/7/25Data whose decimal point's presence and/or position depends on input range. Example:When Read messured value(PV) is -20.0°c,-20.0 is processed as -200; When Read PID output value is 20,20 is process... ...
2016/8/27the master controls communication between master and slave. A typical message consists of a request(query message) sent from the master followed by an answer(response message) from the slave. When mas... ...
2016/11/18Two control methods are supported: PID control and ON/OFF control. Switching between PID control and ON/OFF control is executed by the controller Proportional band parameter. When parameter Proportio... ...
2016/11/18Autotuning (AT) is the function of automatically measuring, computing and setting the optimum PID constants. The requirements for autotuning (AT) start and suspension are described in the following. ... ...
2017/1/23The operator set mode is used to set parameters for KCM-9 Temperature Controller. The operator set mode is used to set parameters for KCM-XJ Multi-Loop Temperature Controller.... ...
2018/6/12Alarm (ALM) function sets up the alarm status when the measured value (PV) or the deviation reaches the alarm set values. In the alarm status, the alarm output is output from the digital output termin... ...
2016/9/16Contact us| Legal declaration | Site map
KINGCREATE is a temperature controller design and manufacturing company in China. Innovate with 300+ analog Advanced Universal PID Temperature Controller with software, tools and the industry‘s largest sales/support staff.
© Copyright 2007-2023 KingCreate Instruments Co.,Ltd.
