Thermocouple/RTD Universal input Ramp/Soak Temperature Controller Relay output

Introduction:

Service Life: Use the Digital Controller within the following temperature and humidity ranges:
Temperature: −10 to 55°C (with no icing or condensation), Humidity: 25% to 85%.
●The Control can be programmed with maximum 64 segments.Program can be executed automaticall,can be restored after power failure situation.
●Can be connect the following sensors and signals to the universal input(K.E,J.T.S,R,B,N,PT100).
●Can be easily set the optimum PID constants by performing AT (auto-tuning) with the limit cycle method,or ON-OFF Control Mode.
●Can be output an alarm when the deviation, process value, set point, or manipulated value reaches a specified value.
●With any model that supports communications, you can use communications , Modbus-RTU
●With any model that provides a transfer process value as a 4 to 20 mA or 1 to 5 V transfer output.

Input Sensor:

●Temperature input: CU50(–50.0～150.0℃)/PT100(–199.9～600.0℃)/K(–30.0～1300℃)/E(–30.0～700.0℃)/J(–30.0～900.0℃)/T(–199.9～400.0℃)/S(–30～1600℃)/R(–30.0～1700.0℃)/WR25(–30.0～2300℃)/N(–30.0～1200.0℃)
●Current input (analog input): 4 to 20 mA DC, 0 to 20 mA DC

Control Outputs:

●Relay output
●Voltage output (for driving SSR)
●PID linear current output(4-20mA /0-10v)
●Zero-cross output(for driving Triac)
(A single functional)

Alarms:

●One Relay output
●Two Relay outputs

Dimensions:

h×w×d(Unit: mm) 160×80×85 152×76;
S:80×160×85 152×76;
A:96×96×110 92×92;
D:72×72×110 68×68;
E:48×96×110 44×92;
F:96×48×110 92×44;
G:48×48×110 44×44;
R(din35): 88mm ×72mm ×59mm 。

Transfer Output:

(Optional features)With any model that provides a transfer process value as a 4 to 20 mA or 1 to 5 V transfer output.

Communications:

(Optional features)RS485/RS232 Modbus RTU Communications

Terminal Arrangement: